Flat Stoppers
or 1-877-227-3726
Save your tires during car storage

Preserve tire shape

Provide thermal protection

Available in three product widths for varied tire sizes

Set of four
Too little time with too many tires to keep spinning? FlatStoppers® are saving thousands of tires world-wide while they are “stuck” in storage. Whenever you’re parking your car for 30 days or more, this best-selling product will preserve your tire shape. Once tires are set in FlatStoppers on a level surface, they settle into the pad’s concave depression, which evenly disperses the weight of the car across the increased contact patch and prevents flat spots. Additionally, FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.

New! The RR-FS and RR-FS-10 have a reduced angle of approach for even smoother vehicle positioning. All FlatStopper models are now 28? long with an 8.9 degree angle of approach. If you have monster tires, be sure to check out our supercar version for tires up to 14 inches wide. See options in matrix below.
Dimensions: See matrix, varies by version
Angle of approach: 8.9 degrees
Ramp weight capacity: 1,500 lbs. per ramp
Total vehicle weight capacity: 6,000 lbs.
Maximum tire width: 8” to 14”, see matrix, varies by version
Tire diameter: 25” to 30”
Product weight: See matrix, varies by version
Sold as: 10” width (RR-FS-10), 14” width (RR-FS), and 16” width (RR-FS-16-SC)

• Designed for collector cars, hot rods, etc.–cars with street tires. Do not put your SUV or pickup on them with mud or heavily-lugged tires.
• 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea.
• Made with a lighter formula of polyurea than other Race Ramps products so that the pad will mold to the shape of your tire over time to provide even greater support.
• Lightweight, yet strong and durable.
• Will not rust or transfer heat or cold.
• No-skid, no-scuff material protects your garage flooring from damage.
• Sold as a set of four.
• When buying directly from this site, they come with a 30-day satisfaction guarantee.
• Proudly made in the USA!

• See here.
• Use on a level, flat surface.
• Ensure that the bottom of the ramps make full contact with a solid surface.
• Do not exceed the recommended maximum tire width.
• Never accelerate or apply brakes suddenly. Drive up on the ramps in a slow, steady pace.
• When the vehicle is in place, put it in park (or in reverse gear for manual transmissions) and set the emergency brake.
• You may notice tire indentations in the FlatStopper after you remove the car. This is normal as the FlatStopper is conforming to the tire.
10"(fit tires 8" wide)
3.29"(with 1.25" of lift)
25" - 30"
1,500 lbs. per ramp

14"(fit tires 12" wide)
3.29"(with 1.25" of lift)
25" - 30"
1,500 lbs. per ramp
16" (fit tires 14" wide)
3.29"(with 1.25" of lift)
25" - 30"
1,500 lbs. per ramp
22150 West Eight Mile Rd. Southfield MI. 48033
Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO is the source for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models. With over 25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality products and service.
Home Two Post Lifts Four Post Parking Lifts Heavy Duty Lifts Alignment Lifts Scissor Lifts Motorcycle Lifts
Shop Equipment Brake Lathes Pipe Benders Alignment Machines Wheel Balancers Tire Changers Air Compressors
Copyright©2014 www.aresco.org all rights reserved web design by M.Miller