ATLAS Pro9-D 2 post 9,000 lb

Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO is the source for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models. With over 25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality products and service.

The Atlas® PRO-9D two post above ground lift is the perfect choice for those smaller commercial repair facilities or the “Mr. Homeowner” who demand the highest quality at the absolute best price. The 12 foot tall Atlas® PRO-9D is a TRUE 9,000 lb. capacity two post lift that offers a great value to the customer.

The Atlas® PRO-9D has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks.

The PRO-9D has dual direct drive cylinder, this direct drive system, with fewer moving parts, ensures years of excellent lifting service from your Atlas above ground hoist.

•RO-9D 9,000 lb Overhead 2-Post Lift

• 9,000 lb. Capacity
• Overhead, Open-Floor design
• Overall Height: 144" (12')
• Asymmetric/Symmetric Arms
• Automatic Arm Restraints
• Single-Point Lock Release
• Rubber Guards on Carriages
• Dual Direct-Drive Cylinders
• Powder Coat Finish
• Free 8 Piece Truck Adapter Set
• Mounting Hardware Included
• Shipping Weight: 1,450 lbs.
• 5-year Structural Warranty, 2-year Hydraulic-Power Warranty

Atlas® PRO-9D Specifications
Capacity 9,000 LB.
Overall Height 144" (12’)
Overall Floor Width 134 1/2" (11’ 2 1/2")
Outside Column to Outside Column 124 7/8" (10’ 4 7/8")
Maximum Lift Height (Without Adapters) 68"
Maximum Lift Height (With Adapters) 74 1/4"
Minimum Arm Height 4 1/2"
Inside Column 110” (9’ 2”)
Drive Thru 100” (8’ 4”) Symmetric/ 90 1/2" (7’ 6 1/2”) Asymmetric
Column Size 7 1/4" x 11"
Column Thickness of Steel 5mm
Base Of Lift 14 1/4" x 18"
Motor/Electrical Requirement 220 volt single (1) phase.
A 30 amp breaker is recommended
Oil Requirement 3-5 Gallons AW32/AW46 (NOT INCLUDED)
Shipping Weight 1,450 LBS.
Adapter Heights 4 Each 1.5”, 5”
Arm Hole/Adapter Peg Size 1.5”

Requires a minimum of 4" of concrete with a 3000 psi. rating